Nvme Configuration - IEI Technology WAFER-ULT5 Manual


Legacy USB Support [Enabled]
Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard
support. Normally if this option is not enabled, any attached USB mouse or USB keyboard
does not become available until a USB compatible operating system is fully booted with all
USB drivers loaded. When this option is enabled, any attached USB mouse or USB
keyboard can control the system even when there is no USB driver loaded onto the
system.

Enabled

Disabled

Auto

5.3.9 NVMe Configuration

Use the NVMe Configuration (BIOS Menu 16) menu to display the NVMe controller and
device information.
Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc.
Advanced
NVMe Configuration
No NVME Device Found
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
BIOS Menu 16: NVMe Configuration
Page 80
D Legacy USB support enabled
EFAULT
Legacy USB support disabled
Legacy USB support disabled if no USB devices are
connected
WAFER-ULT5 SBC
---------------------
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit