Sata And Rst Configuration - IEI Technology WAFER-ULT5 Manual

5.4.2.2 SATA And RST Configuration

Use the SATA And RST Configuration menu (BIOS Menu 25) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc.
Advanced
SATA And RST Configuration
STAT Controller(s)
SATA Mode Selection
MINI_PCIE1
SATA1
Hot Plug
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
BIOS Menu 25: SATA and RST Configuration

STAT Controller(s) [Enabled]
Use the STAT Controller(s) option to enable or disable the SATA device.

Enabled

Disabled

SATA Mode Selection [AHCI]
Use the SATA Mode Selection option to configure how the SATA controller(s) operate.

AHCI

Intel RST
Premium
Page 90
[Enabled]
[AHCI]
Empty
Empty
[Disabled]
D Enables the SATA device.
EFAULT
Disables the SATA device.
D Configures SATA devices as AHCI device.
EFAULT
Configures SATA devices as RAID device.
WAFER-ULT5 SBC
Enable or disable SATA
Device
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit