Gen 2
5.4.2.3 SATA Configuration
Use the SATA Configuration menu (BIOS Menu 22) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Chipset
SATA Configuration
STAT Controller
SATA Mode Selection
SATA1
Hot Plug
M2_1
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.
BIOS Menu 22: SATA Configuration
STAT Controller [Enable]
Use the STAT Controller(s) option to enable or disable the SATA device.
Enable
Disable
SATA Mode Selection [AHCI]
Use the SATA Mode Selection option to configure SATA devices as AHCI devices.
AHCI
Page 72
Configure M.2 A-key slot speed to Gen2
[Enable]
[AHCI]
Empty
[Disabled]
Empty
D
Enables the SATA device.
EFAULT
Disables the SATA device.
D
Configures SATA devices as AHCI device.
EFAULT
HYPER-AL SBC
Enables or Disables the
Chipset SATA Controller.
The Chipset SATA
controller supports the
2 black internal SATA
ports (up to 3Gb/s
supported per port).
---------------------
: Select Screen
↑ ↓: Select Item
Enter Select
F1
General Help
F2
Previous Values
F3
Optimized
Defaults
F4
Save
ESC
Exit