Sata Configuration; Bios Menu 5: Ide Configuration - IEI Technology PM-PV-N4551/D5251 User Manual

PM-PV-N4551/D5251 User Manual

5.3.3 SATA Configuration

Use the SATA Configuration menu (BIOS Menu 5) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
PATA Master
PATA Slave
SATA Port0
SATA Port1
SATA Port2
SATA Port3
ATA/IDE Configuration
Configure SATA as
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.

BIOS Menu 5: IDE Configuration


ATA/IDE Configurations [Enhanced]
Use the ATA/IDE Configurations option to configure the ATA/IDE controller.

Disabled

Compatible

Enhanced
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
[Enhanced]
[IDE]
Disables the on-board ATA/IDE controller.
Configures the on-board ATA/IDE controller to be in
compatible mode. In this mode, a SATA channel will
replace one of the IDE channels. This mode supports
up to 4 storage devices.
D Configures the on-board ATA/IDE controller to be in
EFAULT
Enhanced mode. In this mode, IDE channels and SATA
channels are separated. This mode supports up to 6
storage devices. Some legacy OS do not support this
mode.
Select ATA/IDE
Configuration.
---------------------
: Select Screen
 : Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Page 63