Sata Configuration; Bios Menu 7: Sata Configuration - IEI Technology NANO-QM770-R10 User Manual

5.3.5 SATA Configuration

Use the SATA Configuration menu (BIOS Menu 7) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Mode Selection
Serial ATA Port0
Software Preserve
Hot Plug
Serial ATA Port1
Software Preserve
Hot Plug
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.

BIOS Menu 7: SATA Configuration


SATA Mode Selection [AHCI]
Use the SATA Mode Selection option to configure SATA devices as normal IDE devices.

IDE

AHCI

RAID

Hot Plug [Disabled]
Use the Hot Plug option to enable or disable the hot plug function.

Disabled

Enabled
Page 68
[AHCI]
Empty
Unknown
[Disabled]
Empty
Unknown
[Disabled]
Configures SATA devices as normal IDE device.
D Configures SATA devices as AHCI device.
EFAULT
Configures SATA devices as RAID device.
Disables the hot plug function.
D
EFAULT
Enables the hot plug function.
NANO-QM770 EPIC SBC
Determines how SATA
controller(s) operate.
---------------------
: Select Screen
 : Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit