Turn-Signal Lever - Mitsubishi MOTORS Shogun 2007 Owner's Manual

Turn-signal lever

1- Turn-signals
When making a normal turn, use position (1). The lever will
return automatically when cornering is completed.
2- Lane-change signals
When changing lanes, use position (2). It will return to the
neutral position when released.
Also, when you move the lever to (2) slightly then release it,
the turn-signal lamps and indication lamp in the instrument
cluster will flash 3 times.
NOTE
● If the lamp flashes unusually quickly, the bulb in a turn-
E00506500771
signal lamp may have burned out. We recommend you to
have the vehicle inspected.
● It is possible to activate the following functions. For fur-
ther information, we recommend you to consult a MIT-
SUBISHI MOTORS Authorized Service Point.
• Sounding of a buzzer as the turn-signal lamps flash
• Flashing of the turn-signal lamps when the lever is oper-
ated with the ignition switch in the "ACC" position
• The turn signal-lamps 3-flash function for lane changes
can be deactivated.
• The time required to operate the lever for the 3-flash
function can be adjusted.
Instruments and controls
3
3-65