Mitsubishi MOTORS Shogun 2007 Owner's Manual page 285

CAUTION
!
● The distances given are to be used for reference only,
as errors may be caused by various factors, such as
temperature, humidity, or the shape of the obstacles.
Changing the detection areas
The detection areas can be changed as follows:
Vehicles with a towing bar
While the operation of the system is stopped at the "SONAR"
switch, push the "SONAR" switch approximately 3 seconds or
more, and release it. The buzzer sounds twice to indicate that
the detection area has been changed.
Vehicles without a towbar
While the operation of the system is stopped at the "SONAR"
switch, push the "SONAR" switch approximately 3 seconds or
more, and release it. The buzzer sounds once to indicate that
the detection area has been changed.
NOTE
● The detection area will not change if you keep the
"SONAR" switch pushed for 10 seconds or more.
Starting and driving
E00615800032
4
4-83