Mitsubishi MOTORS Shogun 2007 Owner's Manual page 58

Seat and seat belts
Heated seats*
The heated seats can be operated with the ignition switch in the
"ON" position. Operate the switch as indicated by arrows.
The indication lamp (A) will illuminate while the heater is on.
2
1- Heater high (for quick heating).
2- Heater off.
3- Heater low (to keep the seat warm).
CAUTION
!
● Switch off seat heaters when not in use.
2-12
CAUTION
!
E00401100289
● Operate in the high position for quick heating. Once
the seat is warm, set the heater to low to keep it
warm. Slight variations in seat temperature may be
felt while using the heated seats. This is caused by
the operation of the heater's internal thermostat and
does not indicate a malfunction.
● If the following types of persons use the heated seats,
they might become too hot or receive minor burns
(red skin, heat blisters, etc.):
• Children, elderly or ill people
• People with sensitive skin
• Excessively tired people
• People under the influence of alcohol or sleep
inducing medication (cold medicine, etc.)
● Do not place heavy objects on the seat or stick pins,
needles, or other pointed objects into it.
● Do not use a blanket, cushion, or other material with
high heat insulation properties on the seat while
using the heater; this might cause the heater element
to overheat.
● When cleaning the seat, do not use benzene, gaso-
line, alcohol, or other organic solvents; this might
damage the surface of the seat and also the heater
element.
● If water or any other liquid is spilled on the seat,
allow it to dry thoroughly before attempting to use
the heater.
● Turn the heater off immediately if it appears to be
malfunctioning during use.