Towing - Mitsubishi MOTORS Shogun 2007 Owner's Manual

2. Reverse the opening procedure when closing the spare
tyre garnish.
Tightening torque for spare wheel garnish mounting bolt
11 to 25 Nm
(Achieved by applying a force of 40 to 92 N at the end of
the wheel nut wrench supplied with the vehicle.)
CAUTION
!
● The spare wheel should always be secured during
vehicle operation. If a flat tyre is changed, put the
flat tyre in the spare wheel mounting position, and
use the wheel nut wrench to secure it firmly.
NOTE
● Have your damaged tyre repaired as soon as possible.

Towing

If your vehicle needs to be towed
If towing is necessary, we recommend you to have it done by
your MITSUBISHI MOTORS Authorized Service Point or a
commercial tow truck service.
In the following cases, transport the vehicle using a tow truck.
● The engine runs but the vehicle does not move or abnor-
mal noise is produced.
● Inspection of the vehicle's underside reveals that oil or
some other fluid is leaking.
If a wheel gets stuck in a ditch, do not try to tow the vehicle.
Please contact your authorized MITSUBISHI MOTORS
Authorized Service Point or a commercial tow truck service for
assistance.
Only when you cannot receive a towing service from a MIT-
SUBISHI MOTORS Authorized Service Point or commercial
tow truck service, tow your vehicle carefully in accordance
with the instructions given in "Emergency towing" in this part.
The regulations concerning towing may differ from country to
country. It is recommended that you obey the regulations of the
area where you are driving your vehicle.
For emergencies
E00801501819
6
6-29