Mitsubishi MOTORS Shogun 2007 Owner's Manual page 455

3. Support the bonnet by inserting the support bar in its slot.
CAUTION
!
● Note that the support bar may disengage the bonnet
if the open bonnet is lifted by a strong wind.
● After inserting the support bar into the slot, make
sure the bar supports the bonnet securely from fall-
ing down on to your head or body.
To close
1. Unlatch the support bar and clip it in its holder.
2. Slowly lower the bonnet to a position about 30 cm above
the closed position, then let it drop.
3. Make sure the bonnet is securely locked by softly lifting
the centre of the bonnet.
NOTE
● If this does not close the bonnet, release it from a slightly
higher position.
● Do not press down the bonnet hard with a hand as it may
damage the bonnet.
CAUTION
!
● Be careful that hands or fingers are not trapped
when closing the bonnet.
Maintenance
8
8-5