Mitsubishi MOTORS Shogun 2007 Owner's Manual page 358

For pleasant driving
To set all the discs
1. Press the LOAD button (15) for 2 seconds or longer (until
you hear a beep).
2. The autochanger will select the lowest-numbered empty
slot and switch to loading standby mode.
3. When the display shows "LOAD DISC (1~6)", insert a
disc. The autochanger will then automatically select the
next empty slot and enter loading standby mode.
4. Repeat the above-described steps until every slot contains
a disc. Playback will then begin with the disc that you
inserted last.
NOTE
● If you press the LOAD button (15) again while the auto-
changer is in loading standby mode, the loading standby
mode will be canceled.
5
5-62
To eject discs
To eject a single disc
Press the eject button (7) briefly to eject the currently selected
disc.
NOTE
● If you press the eject button (7) while the display is show-
ing "LOAD DISC (1~6)", the loading standby mode will
be canceled and the next disc will be ejected.
● If you do not remove the disc before 15 seconds have
elapsed, the autochanger will automatically reload the
disc and stop.