Mitsubishi MOTORS Shogun 2007 Owner's Manual page 485

5. Referring to the fuse load capacity table, check the fuse
pertaining to the problem.
C- Fuse is OK
D- Blown fuse
NOTE
● If any system does not function but the fuse corresponding
to that system is normal, there may be a fault in the system
elsewhere. We recommend you to have your vehicle
checked.
6. Insert a new fuse of the same capacity by using the fuse
puller and insert the fuse at the same place in the fuse
block.
CAUTION
!
● If the newly inserted fuse blows again after a short
time, we recommend you to have the electrical sys-
tem checked to find the cause and rectify it.
● Never use a fuse with a capacity larger than that
specified or any substitute, such as wire, foil, etc.;
doing so will cause the circuit wiring to heat up and
could cause a fire.
Maintenance
8
8-35