Mitsubishi MOTORS Shogun 2007 Owner's Manual page 284

Starting and driving
The warning buzzer sounds when the system detects an obsta-
cle during operation.
NOTE
● After pushing the "SONAR" switch, reversing sensor sys-
tem operation differs according to the detection area set-
ting.
• Setting when towing bar is not equipped
When the gearshift lever is moved to the "R" (Reverse)
position (with M/T) or the selector lever is moved to the
"R" (REVERSE) position (with A/T), the reversing sen-
sor system will operate even if corner sensor operation
was stopped by pushing the "SONAR" switch.
• Setting when towing bar is equipped
When reversing sensor system operation was stopped by
pushing the "SONAR" switch, the reversing sensor sys-
4
tem will not operate until the engine has been stopped
even if the gearshift lever is moved to the "R" (Reverse)
position (with M/T) or the selector lever is moved to the
"R" (REVERSE) position (with A/T).
To resume reversing sensor system operation, push the
"SONAR" switch or stop and restart the engine, and
then move the gearshift lever is moved to the "R"
(Reverse) position (with M/T) or the selector lever to the
"R" (REVERSE) position (with A/T).
4-82
Warning for obstacles
If there is an obstacle behind the vehicle, a warning buzzer
sounds to indicate the distance between the vehicle and the
obstacle.
Corner sensor
Vehicle to obstacle distance
Approx. 50 to 40 cm
Approx. 40 to 25 cm
Within approx. 25 cm
Back sensor (vehicles without a towing bar)
Vehicle to obstacle distance
Approx. 150 to 80 cm
Approx. 80 to 40 cm
Within approx. 40 cm
Back sensor (vehicles with a towing bar)
Vehicle to obstacle distance
Approx. 150 to 120 cm
Approx. 120 to 60 cm
Within approx. 60 cm
Warning sound cycle
Intermittent
Fast intermittent
Continuous
Warning sound cycle
Intermittent
Fast intermittent
Continuous
Warning sound cycle
Intermittent
Fast intermittent
Continuous