Mitsubishi MOTORS Shogun 2007 Owner's Manual page 326

Table of Contents

Advertisement

For pleasant driving
To search for a broadcast of desired program type:
1. Press the PTY button (10).
2. Press the TUNE button (7 or 8) for less than 1 second at a
time to select your desired PTY.
3. Two seconds after a desired PTY has been selected, the
radio will begin to search for a broadcast of your selected
PTY. During search, the selected PTY on the display
blinks.
4. When the radio picks up a station with your desired PTY,
the display will show the name of the station.
5
NOTE
● If the SEEK button (5 or 6) is pressed for less than 1 sec-
ond, the radio will try to find out another broadcast of the
same program type as currently selected.
● If no station is found with your desired PTY, the display
will show "EMPTY" for about 5 seconds and the radio
will return to the previous station.
5-30
How to enter PTYs in the memory
As many as 6 PTYs can be entered in the memory.
Follow the steps described below.
1. Press either the TUNE button (7 or 8) to tune the PTY to
be entered in the memory.
2. Press one of the memory select buttons (3) for 2 seconds
or longer. The sound will be momentarily interrupted
while the PTY is being entered into the memory. The
number of the button corresponding to the entry into the
memory and the PTY are displayed.
3. The preset memory setting is retrieved by pressing the
button and then releasing it within about 2 seconds.
E00721400089

Advertisement

Table of Contents
loading

Table of Contents