Installing a child restraint system to a 3-point
type seat belt
3-door models
5-door models
Installation:
1. Fasten the seat belt to secure the child restraint system.
Make sure you hear a "click" when you insert the latch
plate in the buckle.
2. Remove all slack by using the locking clip.
3. Push and pull the child restraint in all directions to be sure
it is secure.
E00408700428
WARNING
!
● For some types of child restraint, the locking clip (A)
should be used to help avoid personal injury during
a collision or sudden manoeuvre.
It must be fitted and used in accordance with the
child restraint manufacturer's instructions.
The locking clip must be removed when the child
restraint is removed.
Seat and seat belts
2
2-57