Mitsubishi MOTORS Shogun 2007 Owner's Manual page 242

Starting and driving
↔
"4HLc" "4LLc"
Transfer shift lever position
4HLc
Drive mode switching in
4
progress
4LLc
: Blink
: Illuminate
: Remain off
4-40
2WD/4WD operation indica-
tion lamp
NOTE
● The 2WD/4WD operation indication lamp blinks while
the selection is in process. Take the following precautions
when the indication lamp is blinking.
• Keep the steering wheel in the straight ahead position
while making range selections. If you attempt to drive
forward with the steering wheel turned, gear rattling
may occur and the desired range may not actually be
selected.
• If the front wheel and/or centre differential lock lamps
continue blinking after a "2H" ↔ "4H" ↔ "4HLc"
selection has been made with the vehicle moving, hold
the steering wheel in the straight ahead position and
slowly depress the accelerator pedal several times.
• If, after a "4HLc" ↔ "4LLc" selection has been made,
the front and rear wheel lamps continue blinking and the
desired range is not actually selected, return the transfer
shift lever to its previous position. Place the steering
wheel in the straight ahead position, drive the vehicle
forward, and release the accelerator pedal. Next, hold
down the clutch pedal (with M/T) or place the selector
lever in the "N" (NEUTRAL) position (with A/T) and
make the range selection again.