Headlamp Levelling - Mitsubishi MOTORS Shogun 2007 Owner's Manual

Instruments and controls

Headlamp levelling

Headlamp levelling switch*
Except for vehicles with discharge headlamps
The angle of the headlamp beam varies depending upon the
load carried by the vehicle.
The headlamp levelling dial can be used to adjust the headlamp
illumination distance (when the lower beam is illuminated) so
that the headlamps' glare does not distract other drivers.
Set the dial according to the following table.
3
3-62
LHD
E00517400015
E00517500133
RHD
CAUTION
!
● Always perform adjustments before driving.
Do not attempt to adjust while driving, as it could
cause an accident.
NOTE
● When adjusting the beam position, first put the dial in the
"0" position (the highest beam position).