Mitsubishi MOTORS Shogun 2007 Owner's Manual page 243

● If the front and rear wheel lamps blink rapidly (twice per
second) when you attempt to make a "4HLc" ↔ "4LLc"
selection, the selection cannot be made. Stop the vehicle
and release the accelerator pedal. Next, hold down the
clutch pedal (with M/T) or place the selector lever in the
"N" (NEUTRAL) position (with A/T) and make the range
selection again.
CAUTION
!
● If a problem is detected in the transfer system, a
safety device will activate. The front and rear wheel
lamps will go out, the centre differential lock lamp
will blink, and transfer shifting will become impossi-
ble. Park your vehicle in a safe place, turn off the
engine for a few moments. Restart the engine.
The lamps should resume normal operation. If the
lamps continue to blink, we recommend you to have
the vehicle checked as soon as possible.
Starting and driving
4
4-41