Mitsubishi MOTORS Shogun 2007 Owner's Manual page 184

Table of Contents

Advertisement

Instruments and controls
● If the lamps do not turn on or off with the switch in the
"AUTO" position, manually operate the switch and we
recommend you to have your vehicle checked.
Daytime running lamp
When the ignition switch is in the "ON" position and the lamp
switch is set to the "OFF" position, the low beam of the head-
lamps, tail lamps, etc., will illuminate.
Lamps (headlamps, fog lamps, etc.) auto-cutout
function
● If the ignition key is turned to "LOCK" or "ACC" posi-
tion or removed from the ignition switch, and without
3
opening the driver's door for 3 minutes while the lamp
switch in the "
" position, the lamps will turn off auto-
matically.
● If the ignition key is turned to "LOCK" or "ACC" posi-
tion or removed from the ignition switch and the driver's
door is opened within 3 minutes while the lamp switch in
the "
" position, a buzzer will sound to warn the driver
that the lamps have not been turned off, and these lamps
will automatically turn off.
3-60
*
NOTE
● The lamp auto-cutout will not function when the lamp
switch is in the "
" position.
● When the ignition key has been turned to either the
"LOCK" or "ACC" position or removed from the ignition
switch with the lamp switch in the "
lamp switch is returned to the "OFF" position within
approximately 3 minutes, the auto-cutout function will not
be activated.
When you want to keep the lamps on
● Turn the lamp switch in the "OFF" position while the
ignition key is in the "LOCK" or "ACC" position.
● Turn on the lamps with the switch in the "
position again, then the lamps will remain on.
● Remove the ignition key.
NOTE
● For further information, we recommend you to consult
MITSUBISHI MOTORS Authorized Service Point.
Lamp monitor buzzer
If the driver's door is opened when the ignition key is in the
"LOCK" or "ACC" position or removed from the ignition
switch while the lamps are on, a buzzer will sound to remind
the driver to turn off the lamps.
When the lamp auto-cutout function acts, the buzzer will stop
automatically.
" position, and the
" or "
"
E00506100256

Advertisement

Table of Contents
loading

Table of Contents