Mitsubishi MOTORS Shogun 2007 Owner's Manual page 274

Starting and driving
To activate
1. With the ignition switch in the "ON" position, press the
"ON OFF" switch (A) to turn on the cruise control. The
"CRUISE" indication lamp in the meter cluster will come
on.
4
4-72
NOTE
● If the cruise control is on when the ignition switch is
E00609300553
turned to the "LOCK" or "ACC" position, cruise control
will be on automatically the next time you start the
engine. The "CRUISE" indication lamp will also be on.
● If the battery voltage is insufficient, the memory data for
the cruise control may be erased.
As a result, the "CRUISE" indication lamp may not come
on when you restart the engine.
If this happens, press the "ON OFF" switch once again to
turn on the cruise control.