Instruments and controls
Setting the declination
The declination is the difference between true north (the direc-
tion of the geographic north pole) and where a compass needle
points to. Since the declination varies from place to place, it
needs to be set for each region. Otherwise the compass will not
show the correct direction.
Set the declination by the following steps:
3
NOTE
● The default declination setting is 0 degrees. In accordance
with the illustration, set the declination setting to the dec-
lination contour nearest to a region where you drive the
vehicle.
● The declination can be set at intervals of 1 degrees, from
28 degrees west (W28) to 28 degrees east (E28).
3-38
With a settings display showing, press the "ADJ" button and
select "COMPASS VARIANCE".
1. Press the function button for "SELECT".