Mitsubishi MOTORS Shogun 2007 Owner's Manual page 271

Active traction control function indication lamp
The indication lamp (1) should illuminate when the ignition
switch is turned to the "ON" position and should go off after a
few seconds.
If the indication lamp stays on or does not illuminate when the
ignition switch is turned to the "ON" position, we recommend
you to have your vehicle inspected.
When the active traction control system operates, the active
traction control function indication lamp (1) blinks and the
indication lamp for the wheel (2) being subjected to antispin
control also blinks.
Example indication: Active traction control function control-
ling front-right wheel
NOTE
● In the event of a fault in the active stability control func-
E00614200097
tion, the
result, an indication of the active traction control function
is limited to flashing of the indication lamp for the wheel
(2) being subjected to antispin control.
Starting and driving
and indication lamps illuminate. As a
4
4-69