Mitsubishi MOTORS Shogun 2007 Owner's Manual page 181

2. Press the "SET" function button. The display will flash
twice and the barometer indication will return to the fac-
tory setting.
NOTE
● Although the barometer value is changed to the factory
setting, a barometer unit you have selected is unchanged.
● You can return to the previous display by pressing the
"BACK" function button.
3. After setting the barometer default, press the "INFO" but-
ton to return to the information display.
Care of the monitor
If the monitor becomes covered in fingerprints or otherwise
dirty, clean it with a soft and dry cloth.
NOTE
● Don't use a wet cloth or abrasive cleaner as this may
cause damage.
Instruments and controls
3
E00519700012
3-57