Mitsubishi MOTORS Shogun 2007 Owner's Manual page 493

3. Remove the entire socket and bulb assembly (G) by turn-
ing it anticlockwise.
4. To install the bulb, perform the removal steps in reverse.
CAUTION
!
● Handle halogen lamp bulbs with care. The gas inside
halogen lamp bulbs is highly pressurized, so drop-
ping, knocking, or scratching a halogen lamp bulb
can cause it to shatter.
● Never hold the halogen lamp bulb with a bare hand,
dirty glove, etc.
The oil from your hand could cause the bulb to
break the next time the fog lamps are used.
If the glass surface is dirty, it must be cleaned with
alcohol, paint thinner, etc., and refit it after drying
thoroughly.
Maintenance
8
8-43