Mitsubishi MOTORS Shogun 2007 Owner's Manual page 337

To find the start of each track on a disc for playback
Press the SCAN button (14). "SCAN" will appear on the dis-
play and the CD player will play back the first 10 seconds of
each track on the selected disc.
The track number will blink while the scan mode is selected.
To exit the scan mode, press the SCAN button again.
NOTE
● Once all tracks on the disc have been scanned, playback
of the disc will restart from the beginning of the track that
was playing when scanning started.
● The scan mode will be canceled when radio or CD opera-
tion is selected.
● With a disc that contains both CD-DA and MP3 files, the
scan mode causes only files of the same format (CD-DA
only or MP3 files only) to be played.
To eject a disc
When the CD eject button (7) is pressed, the disc automatically
stops and is ejected. The system automatically switches to
radio mode.
NOTE
● If you do not remove the disc before 15 seconds have
elapsed, the CD player will automatically reload the disc
and stop.
CD text and MP3 title display
This CD player can display CD text and MP3 titles including
ID3 tag information.
CD text
The CD player can display disc and track titles for discs
encoded with disc and track title information. Press the DISP
button (3) repeatedly to make selections in the following
sequence: disc name → track name → normal display mode.
Example
Disc
name
Track
name
NOTE
● The display can show up to 16 characters. If a disc name
or track name has more than 16 characters, press the
PAGE button (10) to view the next 16 characters.
● When there is no title information to be displayed, the dis-
play shows "NO TITLE".
● Characters that the CD player cannot display are shown as
" ".
For pleasant driving
E00725000399
5
5-41