Mitsubishi MOTORS Shogun 2007 Owner's Manual page 357

Table of Contents

Advertisement

To listen to a CD
The CD can be loaded or ejected by pressing the LOAD button
(15) or the eject button (7) even if the audio system power is
off.
1. Press the PWR button (2) to turn the audio system on and
off. The system turns on in the last mode used.
2. Press the CD button (4) to enter CD mode. The auto-
changer will start playback if the CD is already in the
autochanger.
3. To stop the CD, turn off the power by pressing the PWR
button (2) or change over to radio mode by pressing the
AM/FM button (1), or eject the disc by pressing the eject
button (7).
NOTE
● To adjust the volume and tone, refer to "To adjust the vol-
ume" on page 5-44 and "To adjust the tone" on page 5-44.
● As many as 6 CDs can be inserted into the CD auto-
changer.
● For information concerning the handling of the compact
discs, refer to "Handling of compact discs" on page 5-74.
To set discs
E00709601075
To set a single disc
1. Press the LOAD button (15) briefly.
2. The autochanger will show "WAIT" on the display and
start making itself ready for disc loading.
3. When the autochanger is ready for disc loading, the indi-
cator light (A) will come on and the display will show
"LOAD DISC (1~6)".
4. Insert a disc into the disc loading slot.
NOTE
● If there are multiple empty slots, you can select your
desired slot by pressing the DISC buttons (16 or 17).
● If you do not insert a disc for about 15 seconds after the
autochanger starts standing by for loading, the loading
standby mode will be canceled.
For pleasant driving
5
5-61

Advertisement

Table of Contents
loading

Table of Contents