Mitsubishi MOTORS Shogun 2007 Owner's Manual page 165

2. Press the function button for "SELECT".
3. Turn the vehicle slowly through 360 degrees in a safe,
open area with no buildings and other vehicles.
NOTE
● If you wish to stop calibrating the compass part-way
through the procedure, press the "INFO" button or "ADJ"
button.
NOTE
● The "Completed the calibration". message may be dis-
played even if you terminate the turn before it is complete
and return to the vehicle's original direction. The compass
may not be properly calibrated in this case, so you must
turn the vehicle through at least 360 degrees.
Instruments and controls
3
3-41