Mitsubishi MOTORS Shogun 2007 Owner's Manual page 160

Instruments and controls
3. Use the function buttons to adjust the brightness.
3
"+"- To make the display brighter
The display becomes brighter by one step, every time
you lightly press the "+" function button. If you con-
tinue pressing the button for about 2 seconds or more,
the indication is fast-forwarded.
"-"- To make the display darker
The display becomes darker by one step, every time you
lightly press the "-" function button. If you continue
pressing the button for about 2 seconds or more, the
indication is fast-forwarded.
"SET"- To set the brightness
Press function button "SET" to set the new brightness.
The display will flash twice.
3-36
NOTE
● If you next wish to adjust the other adjustment setting
(daytime or nighttime), press the "ADJ" button or
"BACK" function button.
4. After adjustment, press the "INFO" button to select the
information display.
NOTE
● As the display brightness can be adjusted in the center
information display only, the brightness inside the meter
cannot be changed.