Mitsubishi MOTORS Shogun 2007 Owner's Manual page 262

Starting and driving
ABS warning lamp
The ABS warning lamp should illuminate when the ignition
switch is turned "ON", and should go off in a few seconds.
4
CAUTION
!
● If the warning lamp stays on or does not illuminate
when you start the vehicle, it indicates that the ABS
is not functioning and that only the standard brake
system is in operation. (In this condition the stand-
ard hydraulic brake system will still function.) We
recommend you to have your vehicle inspected as
soon as possible.
4-60
NOTE
● Depressing the brake pedal repeatedly may turn on the
E00607200532
brake warning lamp, ABS warning lamp and brake warn-
ing buzzer. (The ASTC indication lamp and active stabil-
ity control function OFF indication lamp also turn on.) It
is normal if the lamp goes out and the buzzer stops sound-
ing after a few seconds.
● On vehicles with the rear differential lock, the active sta-
bility & traction control (ASTC) and anti-lock brake sys-
tem (ABS) functions are suspended while the rear
differential lock is activated. ASTC indication lamp,
active stability control function OFF indication lamp,
ABS warning lamp and brake warning lamp are illumi-
nated while these functions are suspended. It does not
indicate a problem. When the rear differential lock is dis-
engaged, these lamps go out and function again.
Refer to "Brake warning lamp" on page 3-13, "ASTC
indication lamp" on page 4-64, "Active stability control
function OFF indication lamp" on page 4-67.