Mitsubishi MOTORS Shogun 2007 Owner's Manual page 185

Dipper (High/Low beam change)
When the lamp switch is in the "
changes from high to low (or low to high) each time the lever is
pulled fully (1). While the high beam is on, the high beam indi-
cation lamp in the instrument cluster will also illuminate.
Headlamp flasher
E00506200055
The high beams flash when the lever is pulled slightly to (2),
" position, the beam
and will go off when it is released.
When the high beam is on, the high beam indication lamp in
the instrument cluster will illuminate.
NOTE
● The high beams can also flash when the lamp switch is
OFF.
● If you turn the lamps off with the headlamps set to high
beam, the headlamps are automatically returned to their
low-beam setting when the lamp switch is next turned to
the " " position.
Instruments and controls
E00506300128
3
3-61