Mitsubishi MOTORS Shogun 2007 Owner's Manual page 288

Starting and driving
How to use the rear-view camera
When you place the shift lever in the "R" (Reverse) position
(on vehicles with M/T) or selector lever in the "R"
(REVERSE) position (on vehicles with A/T) with the ignition
switch in the "ON" position, the view behind the vehicle will
automatically appear on the screen of the Mitsubishi Multi
Communication System (MMCS). When you move the shift
lever or selector lever to any other position, the screen will
return to its original indication.
NOTE
● The buzzer that sounds while the vehicle is reversing indi-
cates that the selector lever is in the "R" (REVERSE)
position. It does not warn of an obstacle behind the vehi-
cle (on vehicles with A/T).
● If you press any of the buttons on the MMCS control
4
panel while the screen is showing the view from the rear-
view camera, the screen indication will change to the one
for that button.
4-86
Example of rear-view camera screen indication
The lines (F and G) in the view from the rear-view camera have
the meanings shown below. Please use them as guides.
● Red: The point approximately 50 cm behind the vehicle
● Green: The point approximately 20 cm beyond the width
of the vehicle on either side