4. Place the jack under one of the jacking points shown in
the illustration. Use the jacking point closest to the tyre
you wish to change.
D- Front jacking point
E- Rear jacking point
WARNING
!
● Set the jack only at the positions shown here. If the
jack is set at a wrong position, it could dent your
vehicle or the jack might fall over and cause per-
sonal injury.
● Do not use the jack on a tilted or soft surface. Other-
wise, the jack might slip and cause personal injury.
Always use the jack on a flat, hard surface. Before
setting the jack, make sure there are no sand or peb-
bles under the jack base.
For emergencies
6
6-23