Outside Rear-View Mirrors - Mitsubishi MOTORS Shogun 2007 Owner's Manual

Outside rear-view mirrors

Compound curved-surface mirror*
On the driver's side, a compound curved-surface mirror is
used, while on the front passenger's side, a single curved-sur-
face mirror is used.
1- Compound curved-surface mirror
2- Single curved-surface mirror
While the single curved-surface mirror has a fixed curvature,
the compound curved-surface mirror has different curvatures
between the inner and outer sides of the boundary line (A).
The inner side of the boundary line provides the same vision as
that available from an ordinary door mirror.
However, the outer side of the boundary line provides a wider
angle of vision compared to an ordinary door mirror.
WARNING
!
E00600900484
● The sense of distance that you get from an object
you see on the inner side of the mirror boundary line
differs from the sense of distance that you get from
an object you see on the outer side.
An object you see on the outer side of the boundary
line of the mirror will look farther away than actu-
ally is as compared with an object you see on the
inner side.
To adjust the mirror position
The outside rear-view mirrors can be operated when the igni-
tion switch is in the "ON" or "ACC" position.
WARNING
!
● Do not attempt to adjust the rear-view mirrors while
driving. This can be dangerous.
Always adjust the mirrors before driving.
● Your vehicle is equipped with convex type mirrors.
Please take into consideration, that objects you see
in the mirror will look smaller and farther away
compared to a normal flat mirror.
Do not use this mirror to estimate distance of follow-
ing vehicles when changing lanes.
Starting and driving
E00601000105
4
4-11