For emergencies
10. Put the notch (J) provided on the jack handle end on the
valve (K) of the jack.
Using the jack handle, turn the release valve anticlock-
wise slowly to lower the vehicle until the tyre touches the
ground.
WARNING
!
6
● Be sure to open the release valve slowly. If it is
opened quickly, the vehicle will drop abruptly and
the jack may come out of position, causing a serious
accident.
6-26
11. Tighten the nuts crisscross in 2 or 3 steps until each nut
has been tightened securely.
Tightening torque
105 to 125 Nm
(Achieved by applying a force of 390 to 460 N at the end
of the wheel nut wrench supplied with the vehicle.)
CAUTION
!
● Never use your foot or a pipe extension for extra
force in the wheel nut wrench. If you do so, you will
tighten the nut too much.