Headlamp Levelling Switch - Mitsubishi MOTORS Colt 2007 Owner's Manual

Instruments and controls
Headlamp flasher
The high beams flash when the lever is pulled slightly to (2),
and will go off when it is released.
When the high beam is on, the high beam indicator lamp in the
instrument cluster will also illuminate.
NOTE
● The high beams can also flash when the lamp switch is
OFF.
● If you turn the lamps off with the headlamps set to high-
beam illumination, the headlamps are automatically
returned to their low-beam setting when the lamp switch
is next turned to the "
3
3-34
E00506300043
" position.

Headlamp levelling switch

The angle of the headlamp beam varies depending upon the
load carried by the vehicle.
The headlamp levelling switch (A) can be used to adjust the
headlamp illumination distance (when the lower beam is illu-
minated) so that the headlamps' glare does not distract the
drivers of approaching vehicles.
Set the switch (referring to the following table) to the appropri-
ate position according to the number of people and the load in
the vehicle.
E00506400581