Shutting Down Services - Nortel CallPilot 703t Maintenance And Diagnostics

January 2007

Shutting down services

This section describes how to shut down a service using a specific serial
port. Use the following procedures before invoking the TSTSERIO local
loopback tests.
.
.
Service to stop for COM 1 testing
Routing and Remote Access
Services to stop for COM 2 testing
CallPilot SLEE Service
CallPilot MWI Service
CallPilot Access Protocol Emulator
CallPilot Blue Call Router
CallPilot Call Channel Router
CallPilot Time Service
Routing and Remote Access
703t Server Maintenance and Diagnostics
CAUTION
Risk of communications loss
By stopping the services on COM 1 or COM 2, you lose the
support access feature.
CAUTION
Risk of stopping call processing
By stopping the services on COM 2, you stop call processing
on CallPilot.
Using serial port diagnostic tools
67