Nortel CallPilot 703t Maintenance And Diagnostics page 36

Troubleshooting your CallPilot system
Beeps
2
Series of low-
pitched single
beeps
2 long high-
pitched beeps
3
Table 3: Bootblock error beep codes
Number
of beeps
1
2
3
4
5
6
36
Error message
Recovery boot error Unable to boot from floppy disk
Recovery
failed
Recovery
complete
Recovery failed
Error message
Refresh Timer Failure The memory refresh circuitry on
Parity Error
Boot Block
Failure
System Timer
Processor Failure
Keyboard Gate A20
Failure
Description
drive or CD-ROM drive.
Recovery process will retry.
Unable to process valid BIOS
recovery images. BIOS has
already passed control to the
operating system and flash
utility.
BIOS recovery succeeded. Ready
for power-down or restart.
Recovery failed. Disk is not
bootable or the disk is not
inserted.
Error message and conditions
the motherboard is faulty.
Parity cannot be reset.
See "Bootblock error 3-beep
codes" on page 37.
System timer not operational.
Processor is faulty.
Keyboard may be bad.
Standard 1.06
CallPilot