Running Integrated Diagnostics - Nortel CallPilot 703t Maintenance And Diagnostics

Using CallPilot Manager to monitor hardware

Running integrated diagnostics

Run diagnostic tests from the Diagnostics section on the Maintenance
screen in the following circumstances:
You want to ensure that a component is operating properly after
installing or reinstalling it.
The CallPilot server has trouble processing incoming calls, and you
hope that diagnostic results can tell you why.
Problems include static, dropped calls, and cross talk (hearing
another conversation).
Before you begin
ATTENTION
Diagnostic tests available for each component
The diagnostic tests that are available for each component are listed in
the Diagnostic section of the Maintenance screen. To view the list of
diagnostic tests for a particular component, click the component in the
component tree.
Components that have diagnostic tests available
The following table identifies the components on which you can run
diagnostics when connected to a Meridian 1 switch or Succession 1000
switch.
96
Take the component out of service before you run the
diagnostic test. See "Starting and stopping components"
on page 92.
Standard 1.06
CallPilot