Working with the CallPilot server BIOS
Overview
The BIOS of the server defines the server compatibility with expansion
hardware. All systems configured by Nortel are shipped with at least the
minimum vintage BIOS. However, new BIOS may be issued to support
new hardware standards and options.
BIOS release
The following are tested and supported releases of BIOS and firmware
for the server:
Intel BIOS release: P16 Build 75
firmware:
BMC 1.18
FRU/SDR 5.5i
If these releases are not being used on the 703t server, they must be
updated.
To determine the BIOS release
1
Start (or restart) the server.
2
Read the BIOS version on the display.
The BIOS version appears after the MAC address information.
You can also find the BIOS version in the BIOS configuration sections
in the server menu. See "To configure the BIOS," on page 224 for
instructions.
216
Standard 1.06
CallPilot