To Split The Raid - Nortel CallPilot 703t Maintenance And Diagnostics

RAID operations
Full data backup
ATTENTION

To split the RAID

ATTENTION
1 Click Start
to load the MegaRAID console.
Note: Ensure that Access Mode
click OK.
Result: The MegaRAID Power Console Plus window appears.
2 Ensure all drives are in ONLINE state (marked GREEN).
3 In the Physical Devices section, right-click the Channel-2 hard disk
drive. Example: Channel-2 (0) A1-2-Onln.
4 Select Tools
Result: A message appears advising that marking the Online drive
Failed results in changes.
5 Ignore the warning and click OK. The drive status will change to
FAILED and the color of the icon will change to RED.
Example: Channel-2 (0) A1-2-Failed.
182
As an extra precaution, Nortel recommends that a full
system backup be performed PRIOR to performing a
RAID-split. For more information on system backups, refer
to the CallPilot Manager online Help.
Because the 703t has only one physical drive per
channel, the RAID splitting can be done using the
Windows MegaRAID console without risk of CallPilot
database corruption.
➝
Programs
➝
Fail Drive from the pop-up menu.
➝
Power Console Plus
➝
Full Access is selected and
Standard 1.06
➝
Launch Client
CallPilot