To Invoke The Net Start Command From Windows; Restarting Services - Nortel CallPilot 703t Maintenance And Diagnostics

Using serial port diagnostic tools

Restarting services

This section describes how to restart the services for COM 1 or COM 2
after invoking the TSTSERIO local loopback tests.
Service to restart after COM 1 testing
Routing and Remote Access
Services to restart after COM 2 testing
CallPilot SLEE Service
CallPilot MWI Service
CallPilot Access Protocol Emulator
CallPilot Blue Call Router
CallPilot Call Channel Router
CallPilot Time Service
Routing and Remote Access
Net Start command
Use the Net Start command to restart a specified service on a serial port.
The syntax for the Net Start command is as follows:
net start "[service-name]"

To invoke the Net Start command from Windows

1 Click Start
Result: The Command Prompt window appears.
74
➝ ➝
Programs
➝
Accessories
Standard 1.06
Command Prompt.
CallPilot