January 2007
SCSI controller diagnostics
BIOS initialization
Most information about SCSI is displayed as part of the BIOS
initialization screen.
During BIOS initialization, check to make sure that the tape drive is
listed correctly. If the tape drive is not listed correctly:
Ensure that internal cable connections are made properly.
Check that tape drive settings are correct.
Check tape drive termination.
For more information refer to:
"SCSI and IDE drive cabling" on page 146
"Replacing the tape drive" on page 156
703t Server Maintenance and Diagnostics
Troubleshooting your CallPilot system
39