To Invoke The Tstserio /P Command From Windows - Nortel CallPilot 703t Maintenance And Diagnostics

January 2007
To invoke the TSTSERIO /P command from
Windows
1 Click Start
Result: The Command Prompt window appears.
2 At the Command prompt, type tstserio with the required
parameters, and then press Enter.
For example, type TSTSERIO /P com1 or TSTSERIO /P com 2,
and then press Enter.
3 Type Exit, and then press Enter to exit the Command Prompt
window.
TSTSERIO external loopback plug subtests
The following external loopback subtests are available for the
TSTSERIO command. For each of these tests, an external loopback
connector must be used. For more information, see "Conducting
TSTSERIO tests with the loopback plug" on page 73.
Subtest name
edat
emsr
eint
703t Server Maintenance and Diagnostics
➝ ➝
Programs Accessories
Description
External data bus loopback. This test requires an
external loopback connector.
External modem status register. This test requires an
external loopback connector.
Test ability of device to generate interrupts. This test
requires an external loopback connector.
Using serial port diagnostic tools
➝
Command Prompt.
71