Hospitality Integrated Voice Services Capacity Expansion - Nortel Communication Server 1000S Service Implementation Manual

Page 24 of 136 Description

Hospitality Integrated Voice Services capacity expansion

553-3001-359 Standard 2.00 September 2004
A keycode is not necessary for the following upgrades:
• Backup and restore operations
• Application patching/bug fixes
Nortel Networks provides the customer with a keycode to enable installation
of any upgrade. The keycode is entered through the Command Line Interface
(CLI) under the Functionality Upgrade menu. The keycode is 24 characters
in length and is entered in three sets of eight digits each, called keycode1,
keycode 2, and keycode 3.
Keycodes can enable additional functionality within an existing application
(such as adding ports and features) or can accompany a PC Card to provide
new software or pre-recorded announcements.
Each Hospitality Integrated Voice Services card can be configured to provide
two, four or eight ports. To activate a different number of ports than are
currently active, follow the steps in Procedure 1.
Procedure 1
Changing the number of active ports
1 Disable the Hospitality Integrated Voice Services card in LD 32.
2 Enter the CLI.
3 Select the Functionality Upgrade menu.
4 Select Modify to change the maximum number of ports available.
5 Select Save to save the changes.
6 Enable the Hospitality Integrated Voice Services card in LD 32.
After saving the changes, enter the correct keycode that enables the changes
to take effect. The keycode is 24 characters long, Enter it in three sets of eight
digits each (keycode1, keycode2, and keycode3). Refer to "Functionality
Upgrade" on page 104
End of Procedure
of this document for details.