Nortel CallPilot 703t Maintenance And Diagnostics page 204

Working with DIMMs and the CPU
3 Using both hands, remove the heat sink housing, as follows:
a. Grasp the bottom edge of one side of the heat sink housing,
.
b. Repeat step a for the other side.
c. Lift the housing away from the heat sink.
204
and pry the bottom tabs away from the heat sink.
CAUTION
Risk of equipment damage
Ensure that you do not bend the wings of the heat
sink while removing the heat sink housing as this
will cause damage to the heat sink.
Standard 1.06
CallPilot