Nortel CallPilot 703t Maintenance And Diagnostics page 97

January 2007
Table 13: Diagnostics tests available for components
Component
Media Bus
MPB board
Time Switch
Multimedia Channels
DS30X link
Channels
If a diagnostic test fails or cannot be run
If a warning message appears, the diagnostic test cannot be run because a
prerequisite condition has not been met. If a diagnostic test fails, a
message appears in a new browser window (see the example on page
98).
In both cases, check the Alarm Monitor to determine the reason and the
appropriate action to take.
If the Alarm Monitor and Event Browser do not provide a solution to a
hardware problem, you may need to replace or service a component. If
the problem is with a component that is not replaceable because it is not
a physical entity (such as the Time Switch), you must either replace its
parent component or contact your Nortel technical support
representative, depending on the component.
703t Server Maintenance and Diagnostics
Using CallPilot Manager to monitor hardware
Diagnostics
available?
No
Yes
No
No
No
No
Replaceable?
No
Yes
No
Yes
(via MPB96 board)
No
No
97