To Remove The Side Cover; Removing The Side Cover - Nortel CallPilot 703t Maintenance And Diagnostics

Replacing basic chassis components

Removing the side cover

This section describes how to remove the server side cover so that you
can work with interior components. The side cover is on the left side of
the server when the server front panel is facing you.

To remove the side cover

.
.
Figure 16 on page 125 shows how to remove the side cover. See the
following instructions for removal.
124
WARNING
Risk of personal injury
To prevent personal injury, use caution when you handle the
sharp edges of the side cover and chassis.
CAUTION
Risk of equipment damage
Use an ESD wrist strap to protect static-sensitive components.
Standard 1.06
CallPilot