Nortel CallPilot 703t Maintenance And Diagnostics page 87

January 2007
Section
Maintenance
Diagnostics
703t Server Maintenance and Diagnostics
Using CallPilot Manager to monitor hardware
Description
This section shows the state of the selected component.
Use this section to start and stop a component before
running a diagnostic test.
This section appears only for components on which you
are allowed to perform maintenance administration.
For more information about working with component
states, see the following sections:
"Viewing component states" on page 89
"Starting and stopping components" on page 92
Use the Diagnostics section to run one or more
diagnostic tests, or to view the results of the last
diagnostic tests that were run on the selected
component.
This section appears only for components on which you
are allowed to run diagnostics. For more information
about running diagnostics, see the following sections:
"Running integrated diagnostics" on page 96
"Viewing the last diagnostic results" on page 99
87