The Maintenance Page - Nortel CallPilot 703t Maintenance And Diagnostics

January 2007

The Maintenance page

Use the Maintenance page in CallPilot Manager to do the following:
Obtain general information about components.
View component states.
Start and stop components.
Run integrated diagnostic tests.
View the results of the last diagnostic test run against a component.
What the Maintenance page provides
The Maintenance page identifies the server platform and switch
connectivity type. It also provides a tree that, when expanded, lists the
physical and logical hardware components down the left side of the
screen. To list the server hardware components, click the plus sign (+) at
the top of the tree. To list the subcomponents for each component, click
the plus sign (+) beside the component.
Note: The components that are listed on the Maintenance page are based
on the CallPilot server type and the switch that is connected to CallPilot.
The examples in this chapter are for illustration purposes and may not
appear exactly the same on your system.
703t Server Maintenance and Diagnostics
Using CallPilot Manager to monitor hardware
85