To Remove The Chassis Feet; Removing The Side Cover; To Remove The Side Cover - Nortel HMS400 Maintenance Manual

To remove the chassis feet

1. Place the server on its side.
2. Remove the feet as shown in the above diagram.
3. Continue with "Removing the side cover".
WARNING
.
Risk of personal injury or equipment damage
Failure to follow the procedures in "Preparing for hardware
maintenance," on page 97 can result in electrical shock or
equipment damage.

Removing the Side Cover

This section describes how to remove the server's side cover so that you can work with interior
components. The side cover is on the left side of the server when the server's front panel is facing
you.

To remove the side cover

WARNING
.
Risk of personal injury
To prevent personal injury, use caution when you handle the
sharp edges of the side cover and chassis.
Nortel Hospitality Messaging Server 400
Maintenance Guide
April
2006
-100-